Sabaj A20a 2022 Version Power Amplifier MA5332M Chip 350W Class D Bridge Tie Load Provide XLR & RCA Bluetooth 5.0/XLR/RCA Input, RMS 170W x 2(4Ω) 0.004% THD+N

Product Information

USB compatibility ..................................Windows 7 / 8 / 8.1 / 11(Needs Driver) Mac OSX、Linux(Driverless)

I'm running in bluetooth right now, just because I don't want to haul too much stuff down here tonight. Connecting was easy/normal w my Samsung phone. Unfortunately this phone doesn't do Aptx HD, so I can't test that. AAC ..............................................................................16bit/44.1 kHz_320kbps Channel separation ...................................................................................108dBBuild quality is definitely a step up vs some smaller/cheaper Aiyimas I've been messing with lately. Well, at least fit and finish - I can't comment on the internals.

Since I own almost all TPA325X in the market and some Hypex Ncore and Purifi at home, I can tell you that it is pretty good even very good in comparison ... for the little that I have heard. Notice that I've turned on the "Peak" tracing as well to capture the highest values across the 8-average readings. Not unusual to see some 60Hz mains hum with harmonics getting into the measurements with unbalanced connections. We're basically looking at -110dB RCA and -120dB XLR noise floor and distortions otherwise. Just received the new Sabaj A20. This a brand new class D amp made with a dual Infineon Merus MA12070 and fully balanced.A large number of audiophile-grade audio components are used to enhance the subjective sense of hearing; Bluetooth specification...................................................................................5.0