KSIPZE 30m Led Strip Lights RGB Music Sync Color Changing, Bluetooth Led Lights with Smart App Control Remote, Led Lights for Bedroom Room Lighting Flexible Home Decoration

Product Information

Interference from other Bluetooth devices may be the reason why you’re having issues with your Ksipze LED light strip.

Step 2: Clean and dry the surface where you want to install the light strip to ensure the Led Light Strip sticks to the surface.When you choose a connector, be sure it works with the wires you’ll be using according to your type of strip lights—a different connector may be necessary for a monochrome strip light than for a RGB strip light with multiple colors. Ksipze Led Light Strip Can play music and sync with your Smartphone, Laptop, or Audio playback devices to move along with the rhythm of the music.

If your desired measurement doesn’t perfectly line up with marked cutting spots, you’ll still need to cut along the designated lines to ensure your lights work.To cut Ksipze LED lights, locate the nearest marked point on the Led Light Strip then, using a pair of sharp scissors cut along the marked line carefully, making sure not to cut through only the marked points. Once the app has connected to the lights, you can use it to control various settings and functions such as changing the color and brightness of the lights and setting timers and schedules.

Step 8: Open the HappyLighting APP and follow the on-screen instructions to complete connecting your Ksipze Led Light Strip to the HappyLighting app via Bluetooth. All you need to do is pull the small plastic bar of the connector back, peel the adhesive backing from the end of the strip to expose the copper terminals, plug the strip into the connector, and close the plastic bar again. If the Led Strip is not properly plugged in and doesn’t have power then your Ksipze may not be able to connect to Bluetooth.Ricardo has over 10 years of electrical and construction experience and his partners have over 30 years of relevant experience. You can cut off individual LEDs when you need them, but they have to be cut at specific points to work properly. The cut points are usually located every few inches or so, depending on the model of the LED light strip that you have. Refer to the packaging that came with your strip lights for details about the specific kind of light you purchased. Try turning off other Bluetooth devices in the area or moving the light strip to a different location to remove all interference.

No matter which type of connector you choose, you’ll still slide the end of the light strip into the open end of the connector after you’ve cut the strip correctly. If your LED lights are super close together, you won’t be able to use a fold-over connector because it won’t have enough space to close.A slip-on connector will have a gray or black button on each side that you press to lock the strip in place. The light strip should have letters telling you which colored wire goes where, making it easy to align them correctly. Step 1: Check, measure, and prepare the area where you want to install the light strip and cut the strip to fit accordingly. Once you’ve found where you’d like to cut, use sharp scissors to carefully cut along the designated cutting line on the strip. With over two decades of experience, he specializes in troubleshooting issues and maintaining residential electrical systems.