Caleffi - 22mm Inlet Control Multibloc Valve Group 533002CST

Product Information

Read more about the condition New other (see details): An item in excellent, new condition with no wear. They help us to identify popular products and understand your browsing habits so we can display relevant adverts to you. uk/caleffi-altecnic-inlet-control-group-valve-unvented-3bar-22mm-109104007 220114 Caleffi Altecnic Inlet Control Group Valve Unvented 3Bar 22mm https://www. My understanding is the pressure reducing valve ( 3 bar) is to maintain a level and balanced pressure for cold flow and thus level flow and equal pressure on hot water. The charge in the expansion vessel should be the same as the incoming pressure that is set/ controlled by the pressure reducing valve.

Unvented heating system has a caleffi pressure reducing valve, 3 bar with 6 bar safety release valve. Or, could your PRV be allowing some flow-by during the night or day when there's no-one running water, and it's allowing the pressure on the domestic side to creep up to the point it drips out the safety valve? I'm afraid I don't have much knowledge of these items - I do have a PRV fitted in my own home (and a Caleffi as it happens) but I'm not aware of it having a safety release valve on it. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.Specification Part Number 533112CST, F0001223 gtin 8016615624090 Maximum working Temp 65°C Max Inlet Pressure On Application 12. This multibloc is comprised of a pressure reducing valve, a pressure relief valve, and an internal check valve. These Caleffi inlet control groups are designed to control the pressure on the mains supply of an unvented hot water cylinder. li>

Technical data:

• Brand - Altecnic
• Product Type - Inlet Control Group Valve Unvented
• Diameter - 22mm
• Connection - 22mm Copper To Copper
• Length - 97mm
• Height - 110mm
• Maximum Working Temp - 65DegreeC
• Pressure Reducing Valve Setting - 3.

  Comprised of a pressure reducing valve, a pressure relief valve a check valve and filter all included in a single Monobloc valve. This includes a specific connection for a balanced cold water take offs and a dedicated connection for an expansion vessel. It is designed to protect the unvented cylinder by controlling the main supply pressure that goes to the tank and is not designed to regulate the pressure of the entire property. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Pressure reducing valves are devices which, when installed on a private plumbing system, reduce and stabilise the inlet pressure from the water mains.it is a pressure reducing valve (3 bar) on the main inlet feed with a 6 bar safety release valve, it is the safety release valve that is dripping into the tundish, it was doing this approx. Caleffi is a decent make, I understand, but these fellows - well, the safety-release-valves - are prone to allowing a drip through after they've been activated. I would imagine the safety release valve same as the one on the actual hot water tank are there to act if pressure goes to high. months ago and had the full thing replaced, as the 6 bar safety release , although part of full thing, can be replaced separately.

  It has been reconfigured from the original in that the 15mm outflow pipe is an easier connection due to it now being a swivel connector. Since there are three 22mm pipes to hook up and the 15mm outflow you would probably otherwise need a 'union' to be able to make the connection to the tundish. This inlet pressure, in general, is too high and variable for domestic systems to operate correctly. Another possibility that I forgot to mention is that the expansion vessel could be undersized - if the EV cannot cope with the amount of hot water expansion in the system it will then have to go somewhere else (the PRV).li>

• Specially shaped diaphragm to give accurate pressure regulation in response to changes in downstream pressure.

  The unit comprises of a manifold containing a pressure reducing valve, a cold water balancing port with check valve, a check valve and a preset pressure relief valve. But thought best to change the whole thing, and now 6 months later dripping again, to my knowledge not been activated, so annoying faulty again after such short period? Specially shaped diaphragm to give accurate pressure regulation in response to changes in downstream pressure. Do you have a anti-'water-hammer' vessel fitted in a place where it could get really hot during the day, enough to cause the pressure to climb?
  
  Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). Pressure reducing valves (PRV) are installed in domestic water systems to reduce and stabilise the inlet pressure from the mains supply, which is generally too high and variable for domestic appliances to function properly. li>

• The larger outlet chamber creates a low exit velocity which is effective in reducing water noise.