Center RF PROGRAMMABLE Thermostat EHE0200361

Product Information

My problem is that even though I've set my thermostat at 19-20 degrees using the users manual, the temp reading on the display is generally around 25 degrees. On/off thermostat is OK with non modulating boilers to control whole house, but with modulating boilers only needed to switch off boiler on a warm day, and most people have fingers and can do that manually.

e. we have a warm day, it does not control house temperature, if the wall thermostat keeps turning off the boiler then the boiler runs flat out, and does not modulate or use the latent heat.

com founder Martin Lewis has warned that this is one of the biggest practical problems faced by students, with some now not having enough money to live on. The following instructions explain how to program and use the thermostat to provide the most home comfort at the least cost. Whilst every care has been taken to ensure that the information included in this document was accurate at the time of printing, we reserve the right to change specifications at any time. The central unit can also be programmed to keep stable temperatures in the home depending on the time of year it’s being used.

MAN (manual) mode sets the thermostat to act as a simple thermostat with a fixed setpoint throughout the day. You should use the push button to control your boiler only when the RF communication is lost (see Troubleshooting the EHE0200361 ). You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. I'm having to open the windows to make it bearable now we are out of the cold weather, but the boiler keeps firing and i dread to think how much money im burning. My existing timer was problematic and as it was my second and also expensive for a new one I bought a Wolsely model recommended by the counter guy similar to a Honeywell CM727.

I currently have a Worcester Greenstar i boiler connected to a Honeywell BDR91 which wirelessly links to a Honeywell EHE0200361. If it turns on and off manually then the wiring must be ok, if it wasn't it would go bang or not work, so it must be a programming issue.

The EHE0200361 wireless RF thermostat transmits commands using a radio frequency of 868MHz, and the signal is usually powerful enough, within a reasonable distance, to go through your house without disrupting the use of any electric equipment. Could it be something as simple as the boiler central heating temperature dial have being turned right down by accident? The active period is highlighted by a flashing square around the numbers at the bottom of the screen and the selected day is shown with the day indicator. Arguably, getting something for totally free will get a true MoneySaver's heart pumping faster than any cardio workout ever could. and if I'm reading it correctly, it doesn't provide the option of being able to set the gas to come on at a certain time for a certain period, in this case, at 3.This is in two parts - the actual controller which is battery-powered (you've checked that the 'low battery' symbol isn't on or flashing? When it comes to home heating, there’s nothing better to beat the colder months of the year than that of a reliable thermostat device. To select a different target day press the DAY button until the ‘flashing’ day indicator is under the required day, then accept it by pressing the button.