All Weather Roofing Compound Bitumen Waterproof Roof Coating 25 Litre

Product Information

In the case of complex industrial roofs with piping and stacks that have restricted access, repairing and waterproofing only the specific areas where leakage is occurring is not an effective solution, as water can travel under the membrane once penetrated. Climates around the world are becoming more extreme with increased rainfall and above average temperatures.

Any damaged timber or boarding, including fascia timbers, angle fillets, drip battening, decking, and occasionally supporting joists, should be replaced. Overcoating bituminous sheets can be problematic as many solvent based paints will damage the intact bitumen or will not have the same elasticity and result in mud cracking on the surface. If you are looking for a bituminous membrane roof system, then get in touch with our team to discuss your project’s individual needs.PLEASE NOTE : IT IS RECOMMENDED PARTICULARLY ON POROUS SURFACES A BITUMEN PRIMER SHOULD BE USED BEFORE APPLYING ALL WEATHER ROOFING COMPOUND AND A SOLAR REFLECTIVE ALUMINIUM PAINT IS APPLIED ONTO THE ALL WEATHER ROOFING COMPOUND TO PROTECT AGAINST UV LIGHT TO MAXIMISE THE LONGEVITY OF YOUR ROOF.

Like any material, the membrane wears out and eventually cracks and tears, allowing water to pass through. A minimum of 10 °c (50 °f) and no rain forecast during and immediately after application are required to be able to apply the product successfully.The ballast, in the form of round washed stones, paving slabs or soil and planting (green roof systems), is then laid over the membrane. When choosing the right flat roof covering, you need to take a number of considerations into account, including the look you want to achieve, the size of your flat roof, the type of weather it’ll face, and the amount of labour it will require. Elastodeck can be applied by brush on specific localised areas and with an airless gun on the main surface.