Command 17044ES Canvas Hanger, White, Large

Product Information

Command strips make removing pictures from the wall extremely easy. To remove the frame, all you do is take the bottom corners of the frame and slowly pull it off the wall. The pairs of strips attached by Velcro will easily come apart. Additionally, as you’ll see in the next section, Command strips could detach from the wall and ruin your frame, art, or photo. If you follow the instructions, the chances of this happening are slim, but it certainly does happen. The last downside is that you can only use Command strips once. Command designs their pull-tab release mechanism to ensure there is zero wall damage. When you pull the strip to take it off the wall, it stretches out and becomes unusable. Unfortunately, you can’t use them more than once, but paying a little extra for more strips beats the time it takes to patch holes. What Are the Most Common Complaints? The Small Picture Hanging Strips can hold up to 1 pound per pair. The Mediums hold 3 pounds per pair, and the Larges hold 4 pounds per pair. If you don’t get the frame level on the first try, you can adjust where each side of the Velcro meets to get it perfectly level later.

I was recently introduced to 3M Command strips and after a trial I am a fan! It has always seemed to me rather primitive in this technological age to still “bang a nail in the wall” to hang a picture. So far I have re-hung about 10 pictures – mostly light, the heaviest is 2kgs – and they seem pretty firmly fixed to the wall (I keep testing them to make sure). The rear of the picture is generally a smooth surface, often hardboard and my internal walls are emulsioned and smooth (the house is in UK and only 22 years old). The house doesn’t suffer any extremes of heat/cold & humidity. I have been applying the strips to the picture and leaving them overnight to “prove”. Like Andrew, I do not remove the picture when first hung (as specified in the 3M instructions) but hold it firmly in place with moderate pressure and count slowly to 60. So far so good. What I really wanted to find out is what is the longest period anyone has had a picture on the wall for? Correspondents are very keen to tell their stories of failure and then call the product garbage but I would also hate to find out that the pictures all fall off the wall in 2 years time! Reply Step 4: Remove the protective liners that are now facing away from the frame and position your frame where you want it on the wall. This will only occur if you exceed the weight limits and don’t use enough strips, or you don’t allow enough time for them to adhere to the wall before adding the weight of the picture. On the flip side, if you use Command strips, you won’t have to pay for wall putty and paint when you eventually have to patch up holes. How to Use Command Picture Hanging Strips The most common use for these picture hanging strips is, you guessed it, to hang heavy (or light) framed pictures to your walls and other surfaces without damaging them with nails and anchors. This period allows the adhesive to fully adhere to the wall before adding the weight and resistance of the frame.If you’re using three pairs, place onehorizontally in the center of the top frame and two on the top of the sides.

However, when that moment finally comes when you have to take down a picture, buying wall putty, sanding, painting, and being left with a less than perfect wall is a much higher price than the cost of these strips. Press the frame firmly against the wall for at least 30 seconds. Put pressure on the areas where the strips are so they adhere securely to the wall. My advice — if you’re hanging something really expensive or invaluable, use a nail or double up on Command strips. Alternatives to Command Strips

In addition to picture hanging strips, they manufacture clips for outdoor lights, hooks for hanging things on glasswindows and doors, caddies for wall storage, and much more. Not pressing firmly for at least 30 seconds when hanging. Putting pressure on the strips helps them adhere completely. Don’t skip this step. Putting the strips in the wrong spots on the frame. Follow these placement instructions that I covered earlier. In all honesty, I’ve never followed this step and never had an issue. From my experience, as long as your wall is clean and you press the frame against the wall and hold firmly for 30 seconds, you should be all set. Pulling the strips off the wall the wrong way. Pull the tab straight down until the strip releases from the wall. If you try to rip it straight off, the paint will come with it.

STRONG AND VERSATILE: These strips are great for hanging pictures with frames of a maximum of 45 cm x 60 cm, holding a maximum of 5.4 kg. Ideal for different types of solid surfaces, painted, tiled, metal or wood A couple of times, I’ve used two pairs of strips when I really should have used three, and the frame detached and fell (whoops!). Adding an extra pair can be overkill, but will never hurt. How to Remove Command Picture Hanging StripsWe hope you enjoyed reading our review and that now you can confidently hang pictures without using nails. In this in-depth review of Command™ Picture Hanging Strips, you’ll learn exactly how to use them (step-by-step with pictures), common mistakes when using them, which surfaces they work on, the different sizes available, the most significant downsides, and common consumer complaints. To remove the strips from the wall, slowly stretch the pull tab straight down about 12 inches. It will release from the wall. Do not pull the tab straight towards you; doing so could damage your wall. However, if you follow the instructions—clean the wall first, use the appropriate number of strips, apply pressure before hanging—you significantly reduce the risk of pictures detaching from the wall. Not using enough strips. If you use one pair of strips to hang a 20-pound frame, it’s going to fall.