TP-Link EAP660 HD | Omada WiFi 6 AX3600 Wireless 2.5G Access Point for High-Density Deployment | OFDMA, Mesh, Seamless Roaming & MU-MIMO | SDN Integrated | Cloud Access & Omada App | PoE+ Powered

Product Information

Furthermore, if you do decide to use a PoE switch, then the TP-Link EAP660HD doesn’t require that much power (only up to 21.5 W), so you don’t need anything that fancy, but a multi-Gigabit Ethernet switch is still a preferred option. And that’s because of the 2.5GbE port (it’s a shame not to try and take advantage of it, but we’ll see if the WiFi will actually allow us to go above 1Gbps). Internal Hardware Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

What's the difference between the Master Administrator, Administrator and Viewer accounts in the Omada Controller? 04-12-2023 16277 Maximale draadloze signaalfrequentie op basis van specificaties van de IEEE 802.11-standaard. De werkelijke draadloze gegevensdoorvoer en het draadloos bereik kunnen niet gegarandeerd worden en variëren op basis van 1) omgevingsfactoren, met inbegrip van bouwmaterialen, fysieke objecten en obstakels, 2) netwerkomstandigheden, met inbegrip van lokale interferentie, omvang en dichtheid van het verkeer, locatie van het product, complexiteit van het netwerk en overhead, en 3) clientbeperkingen, met inbegrip van nominaal vermogen, locatie, verbinding, kwaliteit en toestand van de client. Add support for displaying CPU utilization, memory utilization, and bandwidth-related configuration in the Standalone mode of the Omada APP. Feature Filter: All User Application Requirement Troubleshooting Configuration Guide official statement Further Assistance Q&A of functional explanation or specification parameters FAQs Using the Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 06-08-2023 17563It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade. Fixed the bug that when a port conflict is detected, the prompt message is not centered and the display is incomplete. What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 16277

Zero-Touch Provisioning requires the use of Omada Cloud-Based Controller. Please go to Omada Cloud-Based Controller Product List to find all the models supported by Omada Cloud-Based Controller. The only complaint is that it is physically imposing and isn't the kind that will go unnoticed. The EAP660HD will provide a great value for money with its quad-core CPU and a 4x4 radio. It can also be managed remotely thanks to TP-Link’s Omada SDN cloud service which is free if a dedicated computer is available. TP-Link has once again shown that a good product can be obtained without costing an arm. The iperf2 server was started on the EAP660HD by enabling SSH and running the iperf command on the console. Clients used were a laptop connected to a 2.5Gb USB to Ethernet adapter and a Samsung S21 smartphone running the HE.NET application. Note: The TP-Link EAP660 HD is an AX3600-class wireless access point, which means that the theoretical maximum data transfer rate on the 2.4GHz band is 1,148Mbps, while on the 5GHz, it’s 2,402Mbps – don’t get your hopes up, because you’re not going to see this performance outside lab conditions. Features and Wireless Test

Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 07-07-2023 17563 Seamless Roaming requires that clients need to support 802.11k/v and may require additional set up. Performance may vary depending on the client device. The case is entirely made of plastic though, so it did needs quite a few openings to let the heat flow outwards (while an alloy body will absorb it faster and perhaps better). Then again, I opened the case and I saw that there is a fair bit of room to allow a proper internal airflow. The case does get warm near the middle of the case, both upwards and downwards, but the EAP660HD did not overheat.

A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade If you are using an old Omada controller and plan to upgrade this firmware for EAP, you must upgrade the Omada Controller as well: Upgrade Guide The Ubiquity U6 LR access point looks a lot like the EAP660HD. It offers similar performance in terms of bandwidth and has a 4x4 radio system. But like the WAX214, the Ethernet uplink port is limited to only 1Gbps while the single-core CPU is not in the same class as the EAP660HD quad-core. You will get more for your money with a EAP660HD. Final verdict Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a Controller (5.0 and Above) 05-31-2023 20217The tear-down process for the TP-Link EAP660 HD is fairly simple, but you do need to be aware that opening up the case will most likely void the warranty. If that’s fine with you, then you need to remove the four screws from the bottom side and it seems that TP-Link also decided to include one more screw underneath the label that’s very difficult to remove without leaving severe marks. I guess it’s their own way of adding a warranty seal, like Asus does. In any case, after removing the five screws, you need a prying tool and carefully detach the top cover. This way, you’ll be able to see the PCB with a large metallic heatsink and a curious antenna design at the top. To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. And then, there’s the BeamForming which focuses the signal towards the compatible client devices, reducing the impact of interference and improving the available bandwidth. But, since most users will want multiple of these devices to work together and form a single network, there is the expected support for the mesh technology.