Aftercut 20400482 Ultra Green + Lawn Feed & Iron Supplement, 100 m2, 3.5 kg, Natural

Product Information

K) Potassium– For grass durability and better hydration of the grass. This helps the lawn deal with drought and disease much better and will deliver a stronger, healthier lawn.

Keep the lawn well watered for at least 2 weeks to help grass seed germination. After 3 days the lawn will become greener and healthier. A. Treatments based on oxalic acid have shown to be effective. Try a small inconspicuous area at first to ensure there is no discolouration of the stone surface Measure area to treat and weigh out correct amount of product. Set aperture to 0 and fill on a level surface – not on a lawn or cultivated area. Select appropriate setting on spreader and evenly spread over whole measured area. Continuously turn handle and walk at a normal pace. Application rate can vary depending on walking speed and handle turning speed. To increase application overlap more frequently. SettingApply the granules thinly and evenly to ensure the same result across the entire lawn. Mark out the areas to be treated. To minimise scorching risk, water granules in well within 48 hours after application if no rain falls Waste not, want not! ‘ Composting is a great way to add organic matter and nutrients to your lawn, and it’s easier than ever to make your own,’ shares the Gardens Revived team.

A. It is likely that the grass was wet when applied. The effect is temporary and will improve with subsequent mowingsSimply sprinkle by hand (wearing gloves) or use a lawn spreader for even distribution after you have mown the lawn for the best results Avoid walking or allowing pets on treated area until the granules have been watered in and the lawn is fully dry A. Water the product in and allow lawn to dry to prevent the product from being transferred (on paws or shoes) from the lawn to other areas where it may stain. During late spring and summer, feed your lawn with Aftercut Ultra Green Plus every 3-4 weeks to keep your grass in tip top condition. Simply apply granules after mowing. This contains balanced nitrogen to prevent scorching and keep grass green and in top condition. Added Potash, Iron and Magnesium help to create a hard wearing lawn that suppresses weeds and moss. Do not exceed the maximum recommended rate of 35gr per sq.m. Overdosing with fertiliser can damage your lawn

A. The stain is from the iron sulphate (moss killer) oxidising and forming rust (iron oxide). It can be removed from most patios with a rust remover containing oxalic acid or citric acid in the form of lemon juice. This should always be tried in a small test area first to make sure there is not any reaction with your particular stone. Fortify your established garden lawn with this extra-greening feed containing added iron and magnesium. Aftercut Ultra Green Plus Lawn Feed 350sqm has a balanced formulation promotes deep greening and encourages the individual grass blades to tiller (produce side leaves and side shoots) that give a fuller appearance to your lawn and make it lush all year round.Best Conditions: apply when the soil is moist and the grass is dry. Do not use during drought, freezing or windy conditions. How to Use Mark out areas to be treated. Sprinkle evenly at a rate of 80 grams per square metre over the marked area. It is good practice to wear gloves when using this product. It is good practice to wear gloves when using the product. Apply the granules thinly and evenly to ensure the same result across the entire lawn. Mark out the areas to be treated. Apply only to established turf/ lawns. Do not use on newly sown lawns or newly laid turf until established for at least twelve months. days – You can mow the lawn 4 days after treatment. DO NOT use the first 4 lawn clippings for mulching, until composted for 6 months

Apply evenly over the marked area with the spreader, by hand or wheeled spreader. Find your spreader settings here. As per the Royal Horticultural Society’s guidelines, you should never take off more than one-third of the grass height, so adjust the cutting height on your mower accordingly – and be sure to keep its blades sharp and clean, too. 8. … but not too much It can be quite confusing to know what settings to use on your type of lawn spreader, never mind using it with various different products. Use the following table to apply Westland Lawn Care Products with a lawn spreader. This guide will tell you which settings to use to apply at the correct rate.However, the first rate of application in spring and autumn can be increased to 50g per sq. metre to boost the lawn and to aid with crowding out moss. Firstly, measure the area to treat and also weigh out correct amount of product. Secondly, set aperture to 0 and fill on a level surface – not on a lawn or cultivated area. Select the appropriate setting on your spreader and then evenly spread over whole measured area. Finally, continuously turn handle and walk at a normal pace. Application rate can vary depending on walking speed and handle turning speed, therefore to increase application overlap more frequently. Setting Fill your compost bin with a 50:50 mix of green materials – like grass clippings, lawn waste, leaves, and old food scraps –and brown materials, such as woody stems, mulched cardboard, and scrunched-up paper. This will ensure you get the perfect blend of nitrogen and carbon in your compost.