Motor Speed Controller, AC 220-240V Motor Speed Control Module Governor for Electromagnetic Asynchronous Motor(JD1A-40)

Product Information

The speed may be varied using a front mounted rotary control knob, and the minimum speed can be adjusted by a side mounted adjustment trim pot. May also be used for low voltage loads (from 24V). Supply and load circuit electrically isolated from one another. DC motor controllers and drives are used primarily to control motor speeds and torques for machine tools, electric vehicles, pumps, etc Servo Motor Controllers

I have hooked this up to a 220v one horse capacitor start, drill motor. I wanted to be able to drop the minimum speed available with the pulleys. The controller does that rather well. I don't have the full range of variation available on the pot. but I presume that is because of the capacitor on the drill.Control induction motors* up to 1.5kW (2HP) to run machinery at different speeds or controlling a pool pump to save money. Also works with 3-phase motors. Full form kit includes case, double-sided silk-screened PCB, heatsink, cooling fan, hardware and electronics (including parts from revised article in August 2013). But TBH a new drill is IMO not the solution, you need to slow it down further than the drill is designed to slow to. A speed controller is the only way. Available attachments: auxiliary module M150 DC and Pulse Converter. When superposing this module, it also possible to control the dimmer module M012 with control voltages (1..5V= or 3...12V= or 6..24V=) or with TTL pulses.

Stepper motor controllers are very popular, they are used for accurate positioning, rotation angles and speed control in stepper motors through. Stepper motor controllers and drives are used primarily in motion control applications in manufacturing and construction environments, among other industries, and are used to control motor speeds, torques, and position. Company policy is that we do not under any circumstances issue instructions to our couriers to leave deliveries unattended when no one is at the delivery location. Loads of applications and with a 25 amp peak rating! With this power controller you can regulate incandescent lamps, heaters, heating lelements, hand drills, electric motors etc. via the supplied potentiometer. 2 operating voltages: 110vac or 240vac. The rated contstant load is 18A but can peak at 25A max. At 240vac this corresponds to 4000va. The units are PWM (Pulse Width Modulation) type controllers. Single phase motors with internal centrifugal starting switches can not be speedcontrolled electronically.

Latest Article Comments

Using an existing drill to wind on cat gut is clearly a good idea, however buying a drill to do the job is something else. PRODUCT SELECTION NOTES: The motor controller should have an output load capacity at least 25% above the motors peak power requirement. Please do NOT rely on motor rating plates for power consumption figures as they often quote average not peak power. You should verify the actual peak power at start-up and under full load before selecting an appropriate size motor controller. Loads of applications! ...regulates incandescent lamps, heaters, hand drills, motors etc. via a potentiometer. Operating voltage: 110...240V~. Max. admissible current: 6 amperes (3A constant duty). At 230V~ this corresponds to 1200 / 600W and to 600 / 300W at 110V~.

AC motor controllers and drives are used primarily in process applications to control the speed of pumps, fans and blowers. AC Motor Controllers are electronic devices that modify the input power to motors by typically adjusting the frequency of the power to the motor for the purpose of regulating the output speed and torque. DC Motor Controllers If it is a DC appliance that needs to be controlled, the module can be installed at the primary (input) side of a transformer which in turn will give a proportional output on the transformers secondary (output) side, thus allowing full control over the DC output too. Perfect for loads of power, voltage & speedcontrol applications. I tried different bulb sizes until I found one which kept the iron hot, but not hot enough to burn the tip. Very simple and it worked, OK today we have thermostatic soldering irons so not required any more. However the same result could have been got using a lamp dimmer, but why, better to keep it simple. Note: This project is designed for brush type motors and is not suitable for induction motors or shaded pole motors. Max. admissible current: 6A (constant duty: 3A), at 110V~ this corresponds to maximally 600 watt or constant duty 300 watt, respectively, or to maximally 1200 watt or constant duty 600 watt, respectively, at 230VacThe controller canonly be used to control the speed of a 1ph, AC electric motor providing that the motor does NOT have an internal centrifugal switch. Use the wife's sewing machine, they have a bit designed to wind bobbins with a good variable speed controller. If you read the Q&A on that drill someone replies to a question asking if it has variable speed, apparently the one you get does not (as you can see it's not mentioned in the spec).