Joined in 2023 
82 
63 About this deal
Keeping your test strips stored in a cool dry place is very important. If they become damp or bleached out by the sun, they may produce inaccurate results. Test strips also have an expiration date, so make sure they’re not too old. Strip Dip Because pH measures how acidic or alkaline your water is, it is important to make sure your hot tub ph Levels are always balanced between 7.2 and 7.6 to avoid impacting your Lay-Z-Spa and your spa experience. For low pH levels below 7.2 you will need to use pH Plus to help raise the pH levels and balance the water.
After testing the PH with your dip test strips you can use the following chemicals to increase or decrease the PH. When you’re ready to begin mixing your chemicals, you should handle them with chemical resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. It is also advised to wear tightly sealed goggles and appropriate protective clothing such as long sleeves, trousers, and closed-toed shoes that fully protect your feet from spills. You should also wash your hands after handling chemicals.Clearwater® chemicals are designed for and tested on Bestway pools but can be used on any and all domestic above-ground pools. Chemical water treatment for pools is essential regardless of how long or how often you plan to use it and this starter kit has everything you need to get started and keep up the water maintenance. The 5 Inch Chemical Floater slowly releases Clearwater Mini Multifunctional Tablets or Chlorine Tablets, making it the perfect accessory for busy spa users who want a hassle-free way of maintaining clear and healthy spa water. The dispenser has an adjustable dial which controls the release of the 20g tablets, ensuring that the sanitizer level of your spa water is consistently and efficiently maintained. Compatible with all spa models. Clearwater pH Plus , also known as ‘pH increaser’ is the best way to increase pH levels that have dropped below the recommended level. To avoid skin discomforts and enable the chlorine in your spa to work effectively, it’s vital that acidity is monitored and controlled. The recommended pH balance of spa water is between 7.2 and 7.6. pH measures how acidic or alkaline your water is and the ideal range for hot tubs is between 7.2 and 7.6. Balanced pH is necessary for other chemicals to work properly and imbalanced pH levels can impact your hot tub components and cause skin irritation.
Chlorine levels of a spa should be 3‑5 ppm, pH levels should be 7.2‑7.6 and Total Alkalinity levels should measure 80‑120 ppm. In the event of spillage, clean up using clean receptacles and dispose of carefully. Do not add water to spilled materials. Do not use floor sweeping compounds to clean up spills. Sweep and scoop spilled material into clean, dedicated equipment. Dip a ClearWater® Test Strip in the centre of your Lay-Z-Spa, remove and hold it still for 15 seconds. Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water.
About ClearWater® Test Strips (150 Test Strips)
If you are going away we would suggest emptying the pool and cleaning it so the water is not left to go stagnant. Do no re-fill until you return from your trip.
The hot tub and pool test strips highlight, chlorine levels, the water's pH and Total Alkalinity levels. There are three separate sections on each strip to indicate each individual level. This TA Increaser helps raise Total Alkalinity levels, which in turn will help control pH levels and chlorine. Remove cover from pool to allow evaporation of the chemical (keep the pool filter running constantly).Please note: The table is only applicable to Clearwater® Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Therefore it is essential to test the water every time before you use it. Never mix different chemicals in concentrated forms. This includes the kit products but also with other products like bleach or weedkillers – a dangerous reaction may occur. Clearwater Clarifier contains flocculants which bind small particles of debris and algae together so that your Lay-Z-Spa filtration system can adequately remove them, resulting in clean and sparkly water. This is a very effective way of preventing your spa water from looking dull and cloudy, due to the build-up of dead algae and debris that is too small to be trapped by your filter. Even if you have treated your spa for algae using Clearwater Algaecide, it is recommended that you use the Water Clarifier to remove any residual debris. Drain hot tub to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chlorine. For high chlorine levels above 5ppm, we would suggest you drain the Lay-Z-Spa to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chemical. Or, remove the cover from the hot tub to allow evaporation of the chemical (keep the spa filter running constantly).
Make sure that any outdoor storage of chemicals is as far away from your hot tub as possible and in a dry, covered area. Humidity or even small amounts of water can cause chemical reactions that could lead to dangerous fumes. Do not eat, drink or smoke when using this product. Have a First Aid Kit available for any accidents This is an ideal set of hot tub chemicals for beginners as it comes with a user guide with simple, easy-to-follow instructions, dosing guidance, safety tips and problem-solving so you can get confidently get started with hot tub water treatment and maintenance. Chlorine demand of water too high at start up, after holidays or due to excess contamination or neglectEvery attempt should be made to avoid mixing spilled material with other chemicals or debris when cleaning up. Do not attempt to reseal any contaminated drums. Do not transport wet or damp material. Need it in a hurry? We are also able to offer before 12 noon and Saturday delivery services. See here for information on these services Having the correct pH levels will ensure your eyes and skin aren’t irritated by your pool water. Most people think it’s the chlorine that causes your eyes to turn red after swimming, but it’s actually the pH level. The ideal levels are between 7.2 and 7.6. Rainwater can significantly affect your pH level, so test your water if you’ve experienced heavy storms. If you need to raise or lower the level, choose the appropriate chemical to add to the water. Calcium Hardness Clearwater Foam Remover is designed to control and prevent foaming in your hot tub, which is typically caused by the reaction of water with shampoos, deodorants and natural body oils present on the user.
Great Deal 
New Comment