Syncros Trail DH Fender Fox 40 49 black Mudguard

Product Information

Select the correct bolts for your fork (details below) and run these into the threads WITHOUT the mudguard which will 'PRIME' and clean the threads before fitting, this part is important (YOU MAY NEED TO RE-TAP THE THREADS IF DEBRIS / PAINT IS LEFT IN THE THREADS FROM THE MANUFACTURE OF THE FORKS) BOLTS: FOX = M3 (2 bolts) | OHLINS = M4 (3 bolts) | SR SUNTOUR = M6 ( *1 bolt)

If you find an item at a lower price with another commercial internet retailer, you will receive it from us at the same price, provided the conditions listed in the link are met.The ProGuard - BOLT ON is our direct mount front mountainbike mudguard designed for big spray and mud protection (DISC BRAKE ONLY) The ProGuard from RRP is a rigid polypropylene guard that comes in two sizes – standard and maximum. The standard is pretty big and offers plenty of protection, but the Max is 21mm longer at the front and 68mm longer at the rear so really ups the ante. It has a three-point fixing via the brace and fork lowers. There are 24 crown holes for zip-ties allowing it to accommodate a wide range of brace sizes and shapes and it’s compatible with 26in, 27.5in and 29in forks and (RRP claims) tyres up to three inches in diameter. The extended side mouldings also help protect the fork seals. To fit the Pro Guard, you do have to punch out some tiny holes, which is okay but there is a bit of trial and error getting it set to the correct angle. The Max size can also move a bit when riding hard and when sending it off a drop there was often a hard crunch as some part of the guard bottomed out on the fork/tyre. That said, if you want to ride 60mph through a peat bog and stay dry, this is the guard we’d recommend – dirt doesn’t get in your eyes, on your clothes, no matter how wet it is or how fast you’re going. Easily the best guard on test.

The benefits of EVOL are further enhanced by our new Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. SpecificationsUse the Allen key provided to screw the bolts in EVENLY a bit each side, go gentle to start off to ensure you DON'T CROSS THREAD THEM, stop once it's pulled together so you can still move it RapidRacerProducts Ltd accepts no liability for any damage or injury caused due to improper fitting or use of our products