OX Pro Heavy Duty Sealant Gun 400ml

Product Information

Admittedly, it took us a little while to dial in this caulking gun’s pressure regulator, which did cause a bit of a mess at first. But, once dialed in, it was wonderful during testing. Releasing the trigger immediately drops the pressure behind the tube, and as a result, there’s very little dripping. Also, once we adjusted the regulator, it offered consistent and smooth pressure. In addition to an air compressor, it requires a hose for operation. Welded steel, epoxy-coated frame for a strong a durable build & will be a long-lasting addition to your tool bag. Bob Vila has been America’s Handyman since 1979. As the host of beloved and groundbreaking TV series including “This Old House” and “Bob Vila’s Home Again,” he popularized and became synonymous with “do-it-yourself” home improvement. In some areas, the Red Devil was excellent during testing. The rubber grip was comfortable yet grippy, and there was plenty of power for squeezing out caulk or sealant in cold temperatures. Unfortunately, it did drip during testing, and the frame didn’t swivel smoothly, but we felt its sturdy build quality and power warranted a spot on the list. Electric: Like other electric tools, an electric caulking gun comes with a cord and requires access to an electrical outlet. Light pressure on a finger trigger allows a user to dispense just the right amount of sealant.

With a 6:1 thrust ratio, this model is best for dispensing low-viscosity sealant, such as painter’s latex caulk. It comes with a built-in pin for puncturing the seal on the caulk tube and a built-in cutter to nip off the tip of the tube. Thrust ratios run from 3:1 to 28:1. Guns with lower ratios are suitable for dispensing thin types of caulk, such as water-based latex caulk, while higher thrust ratios are needed for dispensing more viscous types of caulk, such as epoxy sealants. Revolving Frame Even with all those features, it was the tool’s grip that really stood out during testing. The two rubber over-molded grips were extremely comfortable and easy to squeeze, despite not having a tremendous thrust ratio. Also, we liked that we could cut the tips of our caulking tubes and puncture the seal with this caulking gun. The smooth rod was easy to adjust and release, too. The one thing we didn’t like about this caulking gun was that it’s not as “no drip” as it advertises. It definitely dripped a little for us. First, we really liked that this electric caulk gun utilizes the same battery lineup that many DIYers already own. Next, we like that it produces even and consistent results without wearing out our hands. We also enjoyed the worklight and swiveling frame, as well as the adjustable speeds. We realize that it’s expensive, but anyone applying construction adhesive to floor joists will find that this caulking gun pays for itself in a day or two.

Please See Our 3 Locations Below

With zinc-coated corrosion-resistant sliding components, it is the go-to gun for the professional & DIY trades.

There were quite a few things to like about the Newborn 188 during testing. For one, we appreciated the sturdy welded construction, as it felt like a quality piece despite its reasonable price tag. We also liked the built-in cutter and puncture tool, as they make getting to work faster and easier. The one downside we found was that this caulking gun was more difficult to squeeze than others. Some manufacturers sell squeeze tubes of caulk, which are easier to use above cabinets or tight spaces, and they don’t require a gun. However, it can be very difficult to apply an even and consistent bead of caulk from a standard tube without a caulking gun. Q. Are there different sizes of caulking guns?Testing the PC Products steel caulking gun was enjoyable. It had plenty of thrust for squeezing out sealant despite below-freezing temperatures. We liked that the frame revolves as well. While it does have a smart puncture wire storage (it’s spring-loaded behind the trigger), it doesn’t feature a cutter, which could be a downside for some.