UBIQUITI ER-X Networks EdgeRouter X 5 Ports Gigabit LAN/WAN Router, Black

Product Information

If you search on Unifi USG vs EdgeRouter you will find two common answers; the EdgeRouter is difficult to configure and the USG is slower. Both are true, but there is more to it. USG and EdgeRouter compared The EdgeRouter, on the other hand, comes with its own interface, just like any other router. But that doesn’t mean that it’s harder to setup. It comes with more, advanced, features and a couple of wizards that you can use to setup the router. I have done a couple of speed tests with the EdgeRouter X and the USG. The internet line that I tested it on is DSL 50mbit down and 20mbit up connection. The actual speed that I can reach on the line is around 57mbit down max and 28mbit up. If the speed of 2 is lower then 1, replace the cable between the router and switch (or test the computer with the cable from the switch)

X, Loading OpenWrt and performance Ubiquiti EdgeRouter X, Loading OpenWrt and performance

But even with Smart Queue Management turned on is the router still capable of handling internet connections up to 250Mbit/s with a minimum of 100Mbit/s. SQM is one of the features you most likely are going to use in your network.When I look in the EdgeRouter configuration, I see two policies for ‘traffic-control / optimized-queue: So on one side, we got the speed of the routers but the other big difference between the two is the interface. The big advantage of the USG is that you can manage it within in Unifi Controller. By adding a USG to your network you will get full network insight starting at your internet connection all the way through the client devices. Configuring an Unifi USG Our claims switch adjudication network allows pharmacies to send claims to any third party processor in the United States. Our best-in-class infrastructure and technology lead the pharmacy transaction processing industry with two fully-live, independent, and geographically-diverse data centers for unmatched reliability. WITH hardware flow offloading: 900Mbps+, average ping time of "min/avg/max/mdev = 1.751/2.273/8.150/0.989 ms" CPU is 99% idle. Proudly Australia’s first and largest Prescriptions Exchange Service, eRx Script Exchange was established in April 2009 for doctors, pharmacists and patients. We work in partnership with every leading medical and pharmacy software vendor to ensure our service works for all Australia health professionals.

eRx Network - Innovative Solutions for Pharmacy eRx Network - Innovative Solutions for Pharmacy

With the 1Gbps connection I get 900/675 Mbps with my laptop directly connected to the edgerouter. But I think I might be at the point where just the upload capabilities of my laptop are not up to higher speeds. Something that every manufacturer of networking devices should take seriously is the heat management and Ubiquiti devices are somewhat notorious for running a bit hotter than normal (especially the access points line). Fortunately, the small ER-X remained cool even after I put some stress onto it and I suspect that the vent holes on both sides give a helping hand into maintaining a proper airflow. The first thing you should do is to access the Wizards tab to choose the proper configuration for your device. Here, you can find the Setup Wizards which allows the following configurations: Load Balancing, Load Balancing2 (the difference between these two wizards is that the first uses two different Internet connections for load balancing and failover, while the second uses two different wireless links), WAN+2LAN and WAN+2LAN2 (this configuration allows you to bridge LAN interface and change the subnets) and there’s also the Feature Wizards which include the TCP MSS clamping and UPnP. You can also add new feature wizards by uploading an archive file with the configuration. Figured I would do a little write up on my adventures with a Ubiquiti EdgeRouter X and OpenWRT (18.06.1, r7258-5eb055306f).Main Server: OpenWRT CPU "10% idle", root@bigiron:~# iperf -c 10.1.1.1 -t 60 -P 4, [SUM] 0.0-60.0 sec 6.55 GBytes 938 Mbits/sec Just setup a USG, with a US-8-60W switch, and a UAP-AC-Pro wireless access point yesterday. I’m replacing an Edgerouter PoE-5, which I was previously using with the UAP-AC-Pro. I have the Unifi Controller setup on an RPi3. I sure there have been other improvements, but overall my network seems much more stable since switching to the USG. I also used the ERPoE-5 for about 4-5 years. I know the CPUs between both devices are similar, but not sure what else in terms of specs.

Ubiquiti ER-X Review Getting Into the EdgeRouter X

eRx е със специализирано предназначение за издаване на електронни рецепти в ситуации, при които лекарят няма достъп до компютър с медицински софтуер или работи в режим без връзка с интернет. Благодарение на него, при домашни посещения или други спешни ситуации, извън лекарския кабинет, може да бъде издадена електронна рецепта, отговаряща на добрите медицински практики, приложимите закони и изискванията на НЗИС. Our high-speed pharmacy network provides comprehensive, flexible solutions for pharmacies that are designed to integrate into existing workflows for maximum efficiency. The claims switching service provides access to all U.S. third party processors. Comprehensive services include claims processing and editing, real-time insurance verification, e-prescribing, medical and vaccination claims billing and other services. Innovative solutions such as targeted messaging and electronic co-pay programs are available as well as web-based tools that provide transparency into claim information for analysis and reporting. Whether you’re a bull or a bear, Direxion is with you. Our leveraged ETFs are powerful tools built to help you: At this point I have everything up and running and I am very happy to have internet up. New hardware is in play, but how fast is it? speedtest(dot)net puts my connection around 550/400 down/up, and the CPU on my ERX drops to less than 5% idle. I know my Centurylink(dot)net 1Gbps fiber connection can do 930/930. Lets look at what iperf says, for local traffic: OpenWRT: OpenWRT CPU "45% idle", root@OpenWrt:~# iperf -c 10.1.1.30 -t 60 -P 1, [ 8] 0.0-60.0 sec 5.77 GBytes 825 Mbits/secI have disconnected all connections on the Switch / EdgeRouter and have disabled all non-relevant vlan’s on the EdgeRouter.

Ubiquiti EdgeRouter X Advanced Gigabit Ethernet Router - Scan

The Routing tab displays the status of the Static, Connected, RIP and OSPF routes and, by accessing the OSPF sub-tab, you gain access to the Router (Router ID) and Redistribution (connected, static and default), which allows the communication between routers when there’s a router or link status change. Furthermore, the OSPF network is divided into small sections called areas, which are very useful for scalability purposes and you also get access to the (OSPF) Interfaces.Working in tandem with our claims switching service, eRx Edit is a comprehensive pharmacy claim solution designed to increase third-party reimbursements and improve in-store productivity. Our intelligent edit engine provides real-time pre and post edits on prescription claims prior to being sent to and received from the third party processor.