Razer Panthera Evo: Fully Mod-Capable - Sanwa Joystick and Buttons - Internal Storage Compartment - Tournament Arcade Stick for PS4 and PS%

Product Information

Essentially, each of the 8 pins on the bottom row goes to a specific button, while the top 8 pins all go to ground. There are six (6) Phillips head panel screws located underneath the Panthera EVO. These hold the tinted acrylic cover in place. Each one is accessed using a mini precision screwdriver. Anything larger will risk stripping the screw. Turn carefully - the screw will take a bit of effort to loosen on first go, but will give way. Once the screws are removed, find a safe place to temporarily store them as they are quite small and easy to lose. Hello! Does anyone know where you can buy a replacement plexiglass cover for the Panthera EVO? I tried looking around on the official razer store and also googled but found no store that sells it.

Razer Support Razer Support

If you do not intend to replace the pushbuttons, the process to replace artwork is complete. You can now reverse the steps to reattach the tinted acrylic cover. NOTE: YOU DO NOT NEED TO USE ALL 8 GROUND PINS ON THE RAZER PCB!!! The Razer 16-pin harness had 8 individual wires that each connected ground to a different button. However, your new 20-pin harness that connects to the Kaimana Mini uses 1 ground wire that daisy-chains to every button. This means you only need one ground wire for all of the buttons. I corroborated this with a certified electrician, so no need to somehow condense 8 ground wires into 1 wire for no reason whatsoever!

Now, you can choose the button insert cut to match the pushbutton you intend to use. This allows the insert to fit snugly within the cap. Brands and Model with Artwork Caps If you're confused on which way to plug in the harness into the Mini, just plug it in so that the empty pins are on the left side of the Mini, like This. The artwork, a large blue Razer logo, is essentially the same as the original. The big plus, this time around, is that the artwork can now be changed easily.

Razer Panthera Evo Terbaru - Harga Murah Oktober 2023 Jual Razer Panthera Evo Terbaru - Harga Murah Oktober 2023

Pushbutton manufacturers such as Sanwa, Seimitsu, Crown and GamerFinger have each produced specific models with a clear or translucent plastic cap and flat plunger. These are often used to display a graphical insert, allowing you to enhance the button's appearance. That said, each button manufacturer has designed the artwork cap with a different diameter than their competitors. For example, GamerFinger's artwork cap has a diameter that is slightly larger than Seimitsu or Sanwa. An insert cut for a Sanwa artwork cap will fit loosely when inserted into the GamerFinger artwork cap. This is an undesirable result that can produce a white or colored ring around the insert. Another way that players can misinterpret the pushbutton size is by measuring the pushbutton plunger. Have a look at the diagram at right.

Similarly measuring the button rim can lead to confusion, as it is intentionally larger than the button hole it is placed in. You don't want to use these measurements. Instead, review the button housing diameter, or the hole the button will be placed in. You can do this with a caliper - a digital caliper is often quite helpful for this and other arcade-related projects. Control Panel Configuration The main function buttons have been moved to the top right and are lined up accordingly, giving it a much cleaner look. There’s an added mute and volume button for the mic which is nice. You now need to get power to the Kaimana from the USB port. You'll notice that the USB wires are soldered/glued onto the board, and that there are five pins next to next to them. Take your remaining two jumper wires and plug them into the 1st and 4th pins going from top to bottom, like This. --- ALTERNATE VIEW

set up the Razer Panthera How to set up the Razer Panthera

Unless properly calibrated to your printer and viewing environment, your monitor does not accurately represent the brightness of paper. Artwork submissions may need adjustment to ensure prints are not too dark. Please read this helpful support article for more information

In some instances, a button brand or model does not have a 24mm equivalent with art cap. In this case, we will cut to the default size of Sanwa 24mm insert. Search through the rubber bands and try to find 8 of the smallest bands you can find. Now, place an LED on one of your buttons as best you can.

Artwork Print and Cut for Razer Panthera EVO - Focus Attack Artwork Print and Cut for Razer Panthera EVO - Focus Attack

You now need to separate 11 of the Jumper Wires from each other, so you have 11 individual wires. You need to remove the Plastic Casing from the male ends of each wire.Now just connect each wire to its respective button, and connect each pin on the ground wire to each button. This print came out way better than I expected! It's heavyweight, excellent quality, and the colors are true to what I expected! Thanks FA! BinaryDigit A significant change to the Panthera EVO is that it no longer has Sanwa buttons, instead, Razer has installed their own mechanical buttons, the same ones used in their keyboards. You're basically done! To make your life a billion times easier, use two of the screws you set aside from the beginning and screw down the razer pcb with them. Use the remaining two screws to secure the Breakout to the other holes in the case. Just make sure not to screw down the breakout too much, as there's no protective casing at the bottom, and you don't want to accidentally damage it. Zip-tie or shove the wires in whatever way you please, and you're good to go! If you have not used our Plexworks custom services before, we recommend that you visit our support section for updated information, helpful tips, and resources to get the best output.