S-250-12 12V 20A DC power supply

Product Information

With its open-source measurement tools, the SIGNALlab 250-12 offers a range of features to meet your requirements. It allows for remote control and measurement, providing convenience and flexibility. SIGNALlab 250-12 is most sophisticated Red Pitaya digitizer, built for more demanding industrial applications and research, where robustness and performance matter more than cost.

Introducing the Red Pitaya SIGNALlab 250-12, a versatile and powerful digitizer for your lab needs. This multi-purpose measurement device is designed to enhance your testing and prototyping capabilities while significantly reducing costs.The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources. SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. The SIGNALlab 250-12 is based on a powerful Xilinx Zynq® 7020 Dual-Core Arm® Cortex®-A9 CPU and FPGA, with 1GB DDR memory and 1Gbit Ethernet connectivity. It features two-channel 250Msps, 14-bit signal generation, 12-bit signal acquisition, and two-channel 250Msps. Accuracy and quality of the signal are assured with 12-bit ADC resolution, a frequency response of ±0.5 dB up to 45MHz and -3dB at 60MHz, and channel isolation >60dB (DC to 100MHz).

The device has full software control over the hardware and additional hardware features compared to other Red Pitaya products. Its larger Xilinx Zynq 7020 FPGA enables greater real-time processing capabilities plus a faster 250Msps sampling rate, and just like other Red Pitaya products it offers the benefits of remote access, with an online app user interface accessible through Ethernet or Wi-Fi. Rectangular hollow sections are not as common as UCs and UBs. This is down to the fact that it is much more difficult to bolt it to other beams or to bolt other members to it. They are also available in mild steel to make drilling and welding easier.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards. Subtract the result in the previous step from the number written above it. (10 - 0 = 10) and write the answer at the bottom.