Dell U2715H 27-Inch Widescreen IPS LED Monitor

Product Information

good, and you could tell it was a standard gamut screen. We went ahead and measured the default state with When comparing two different displays, you need to ensure both use the same color temperature, luminance, gamma, and contrast settings at a minimum. A: Keep in mind that your DELL requires approximately 60 minutes to stabilize for best color results. The DELL has both DisplayPort (DP) and High Definition Multimedia Interface (HDMI) inputs. Keep in mind that you may see different results due to cabling and input method. A: Yes, when using DUCCS software with the UltraSharp, you will always want to determine if you wish to save to the Calibration 1 or Calibration 2 preset.

colorimeter with a central point on the screen calibrated to 120 cd/m 2. Measurements for colour temperature (white point) were taken using Here they have factory calibrated the default 'Standard' preset mode to a 2.2 gamma, 6500k white point and with a Also consider is the viewing angle each display is using. LCD displays do not have the same color response off-angle, and it is likely that when using two screens you will sit in front of one, or between the two resulting in a different viewing angle for each display. A: DUCCS can save the color calibration settings to one of two settings stored in the display. This allows you to have two different color settings that are easily selected by the display’s menu. Someone who worked in both print and video mediums could choose to use AdobeRGB and save to Calibration 1 setting for print work, and then choose Rec. 709, saving to Calibration 2 settings for video projects.

Superior image quality and an impressive range of inputs make this one of the best monitors of 2013

A: Although we would like it if you owned more than one DELL branded display, you can use the DUCCS software with a non-DELL display.

ICC profiles and gamma corrections. The screen was tested at default factory settings using the DVI interface, and analysed using A: Once you have saved an ICC profile, you do not want to change the file name. ICC (also called ICM) profiles have external names and internal names. When you change the external name, you change what you see in a file listing. However, the software programs that need to use that profile look to the internal names. So changing an external name causes the profile to not be found if you were to look for it, in an application program. Note: These FAQs assume that the owner of a DELL UltraSharp monitor can use the menu options and physical controls of the display. A: Yes, the Advanced mode offers direct control of the color control hardware that is built into the DELL UltraSharp, and can produce a better result. A: By using a larger number of color values for measurement, the software has the ability to make a more accurate profile. However not all images may show a visual difference or improvement by choosing a larger number of patch values. We would recommend that you start with the Small patch set, to have a baseline for evaluation, should you choose to try the other larger patch sets. Yes, a larger patch set takes more time to measure.

A: Each computer configuration can differ in terms of how long the measurement and computation of a display profile will require. normal operation and pulsates on/off white when the screen is on standby. Unlike some of the other UltraSharp screens we've seen