Corsair ST100 RGB Premium Headphones/Headset Stand (Durable Aluminium Construction, Dynamic 9 Zone RGB Lighting, Built-In 3.5 mm Analog Input with Virtual 7.1 Surround, Dual USB, Black

Product Information

I cue.hid_device_detector: Add close task: "\\\\?\\hid#vid_1b1c&pid_0a32&mi_03#8&28fe0412&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" I cue.firmware.index: "ST100RGB" firmware update, expected version: 0.4.106 update available, on device: bootloader: 0.1 firmware: 0.2.91 I remembered that last time my scimitar mouse would not update its firmware, support had me do it in safe mode. However, the biggest problem for me came with gaming. If I start a gaming session (say on Destiny or Overwatch), after about 15 minutes the ST100 just cuts out and starts reconnecting/disconnecting every 15 secs. Seems to be power draw related, as these games are graphically intensive. But I can't be sure. I've tried multiple USB ports, multiple USB 3.0 to micro cables, and multiple computers. All produce the same result.

ICUE not Detecting ST100 - iCUE Software - Corsair Community ICUE not Detecting ST100 - iCUE Software - Corsair Community

If troubleshooting sound problems doesn’t work, try uninstalling and re-installing the Corsair audio device drivers and iCUE: If so, the issue may be caused by the latest iCUE software update coming into conflict with your Windows build. You can try one of the following fixes below. Just an update on this. As I got home from work and could sit down and trash the ICUE program completely.I cue.hid_device_detector: "\\\\?\\hid#vid_1b1c&pid_0a32&mi_03#8&28fe0412&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" closed.

Corsair ST100 RGB Premium Headset Stand (Durable Aluminium Corsair ST100 RGB Premium Headset Stand (Durable Aluminium

Keeping your headset on a stand can have benefits, as it will keep them from being accidentally damaged or warped due to sitting with awkward pressure on the earcups or supporting band, along with putting them on display to impress your audiophile friends. In a time when expensive wireless RGB gaming headsets and audiophile headphones are so commonplace on the desks of PC enthusiasts, the idea of an RGB headset stand with some very useful features doesn’t seem so far-fetched. I'm still having trouble with power issues though. It seems to be failing with code 1167 in the logs. It'll shut down and then continuously try to start up again but never make a good connection. Does not want to update to newest version/crashed and stays disconnected from iCUE until I re enter its USB Cable to my PC. Hower the newest patch seems to be not applied so it is still 0.02.91 and crashes again when trying to update via iCUE. :sigh!: I'm getting the same issue as everyone else where when trying to update the ST100 firmware it disconnects and fails.

Rubberized base

Restart windows 10 in safe mode, open up icue and install the firmware. It took like 20 minutes on mine to finish but it worked. I cue.hid_device_detector: Add close task: "\\\\?\\hid#vid_1b1c&pid_0a34#7&1d49b690&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" I cue.firmware.update.controller: "ST100RGB" FW update has been started. From "Primary FW: 0.02.91; Secondary FW: 0.02.91; Bootloader FW: 0.01" to "Secondary: Application: 0.4.106"

Corsair ST100 RGB Aluminium Headset/Headphone Stand - Scan

So I did some digging around and saw on a few threads to use USBDeview to see if I could see the ST100 there, and I could. However it appears the ST100 Headset appears as "Unknown." As shown hereDisable USB Selective Suspend, located within the Advanced Power Options of the Windows Control Panel