About this deal
The small EzyGrind inside pipe cutter is the safest and most advanced internal pipe cutter you can get today. An internal pipe cutter is able to cut upward of 10 inches, making it much more effective for large pipes.
Inside Pipe Cutter TigerFish Tools - Small Inside Pipe Cutter
Once the cut is complete, power off the drill and use a deburring tool to clean the edge of the tubes. The cutting head is extended by a pre-charged accumulator, allowing it to ride over seam-welds or non-conformities without any risk of damage to the manipulator assembly. Most tube cutters comprise of a grasping device and three sharp edged wheels forced inward by screw pressure that cut into the pipe as the tool is rotated by hand.The guide wheel is a dry running, self-lubricating bearing that delivers up to 6X faster cutting power at a controlled depth with significantly reduced tool vibration. During deployment, the centralising arms and nozzle assembly are retracted into the body of the tool protecting them and allowing the IPC to slide down the internals of the pile unhindered if angled. NTI developed the Excalibur product line to fill a need for high quality abandonment tools, with a low environmental footprint. The IC1A comes with an abrasive blade for areas where the blade may come in contact with concrete or other hard surfaces which would destroy a saw tooth blade. A complete pass is then carried out using HP water to verify that the manipulator is fully functional and that the nozzle is in contact with the pile wall rather than mud or scale deposits.
Pipe Cutting Tools EZYGRIND - Pipe Cutting Tools
My EzyGrind inside pipe cutter makes cutting in tight spaces much easier and helps get the job done in half the time. Heat-treated steel, saw tooth blades on the IC1S, IC1SL,and IC3/4SL internal pipe cutters make for fast cutting. These are features of EzyGrind's unique patented design that are important for that perfect cut inside a small or large PVC pipe. The inside cutter features a custom-designed, electroplated diamond nickel blade that can cut a range of plastic pipe materials and concrete.
Designed by a professional plumber and a race car engineer, this plumbing tool was developed and tested on real work sites, in real situations. All saw tooth internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs.