About this deal
G Thread is Parallel (straight) threads (BSPP - British Standard Pipe Parallel), which have a constant diameter. DIN3852-E type pressure fittings include a channelled profile in the sealing face for accepting an elastomer seal. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. The main benefit of this connection type is it’s convenience at being integral to the process connector eliminating the need for additional components or alignment of the seal.
Hansgrohe is present in 140 countries and manufactures its products in Germany, France, the USA, and China. No need to use a hex key for installation, just tighten it to the external thread, and install it directly on the top of the isolation valve. Another obvious visual: The G connector ends with a small protrusion (nipple), used to center the gasket.Universal fitting with internal thread CELLFAST IDEAL G1 / 2 "- G3 / 4", for water intake with external thread. One way to find out is to remove it from the installation and look at its threads, but this will result in downtime if the process is active. The other common style of sealing a BSP thread is to make the seal around the outside of the thread at the opposite end of the thread via an elastomer seal sandwiched between the two outer surfaces that come together.
This straight screw in connection is designed with male threads and a compression ring fitting connection.The push-in fitting comes with a sealing ring on one side and threads on the other side, so it's quick and easy to connect and doesn't require any special tools. The connector is made of nickel-plated brass, so you can be sure of long-lasting service without any risk of rust or corrosion.
As for the “A” or “B” in some name, such as the common G ¼ B connection type, the letter denote lets users know 1) it’s a male thread, as female BSP threads don’t have a final letter, and 2) its tolerance class.
S. and Canada – the pressure gauge will very likely have the straight threads of a British Standard Pipe Parallel (BSPP) connector, denoted by the letter G*. The only difference between the two thread forms is that the A form has a slightly tighter thread tolerance than the B form. Where can we source a pressure DP transmitter flanged with a flush diaphragm for liquid level measurement with an output over 0-200 inH2O? You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.